Call 07942704078 75% Response Rate
Send Email
Minimum Order Quantity: 1 Piece
| Motor Speed | 1000 RPM |
| Rated Speed | 1800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Danfoss Hydraulic Motor | 151-7202 Danfoss OMR 100 , 1517202 |
Danfoss OMR Series Orbital Hydraulic Motor is your key to precision and power in hydraulic systems. Renowned for its efficiency and reliability, this motor is engineered to deliver exceptional performance across various applications.
| Item Id | HZNDANOMR2D8230 |
|---|---|
| Manufacturer | Danfoss |
| Stock Status | In Stock |
| Condition | New |
| Model No | Danfoss Hydraulic Motor OMR 100 , 1517202 |
| Material No | 151-7202 |
| Warranty | 6 Months (T&C Apply) |
Efficiency: The OMR Series motor maximizes energy efficiency, reducing operational costs and environmental impact. Precision Control: Offering precise speed and torque control, it ensures accurate performance in critical applications. Compact Design: Its compact and lightweight design makes it versatile and easy to integrate into hydraulic systems. Durability: Built to withstand demanding conditions, it provides long-lasting, low-maintenance performance. Adaptability: Available in various sizes, it suits a wide range of industrial, mobile, and agricultural applications.
Tech SpecsManufacturerDanfossSeriesOMRMotor TypePistonPressure TypeFixedMode of OperationOtherDirection of RotationBidirectionalSpeed Range750 RPMDisplacement Size99.8 CcFlow75 LPMPressure Range225 BARTorque320 NmFrame Size100Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 2000 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Sauer Danfoss Hydraulic Motor | 151-3402 DH 80 |
| Model | Sauer Danfoss 151-3402 DH 80 Hydraulic Motor |
| Search For | Sauer Danfoss 151-3402 DH 80 Hydraulic Motor |
| Series: | DH |
|---|---|
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Journal bearing |
| Mounting Flange: | 2 Shop - A |
| Packaging: | Single pack |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - aligned |
| Swallowing volume: | 80 cm3/U |
| Seal Kit: | 151-1286 |
| Series: | O-Series |
| Shaft Key: | Woodruff key 1/4 x 1 inch (SAE J502) |
| Shaft Seal: | HNBR - High pressure |
| Shaft Size: | Dia. 1 inch - 1/4-20 UNC tap |
| Shaft Style: | Straight |
| Design: | 1 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 2.6 [3.25 x 0.10] - BC dia. 106.4 [4.19] ; Dia. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 250 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Danfoss Hydraulic Motor | 151F2203 OMS 160 |
| Model | Danfoss 151F2203 OMS 160 Hydraulic Motor |
| Search For | Danfoss Hydraulic Motor 151F2203 OMS 160 |
| Series: | OMS |
|---|---|
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | standard |
| Front Bearing: | Tapered roller bearing |
| Mounting flange: | 4 Bolt - Square |
| Packaging: | Single pack |
| Port dimensions: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (2 x M10) |
| Swallowing volume: | 160 cm3/rev |
| Seal Kit: | 151F0111 |
| Series: | O-Series |
| Shaft Key: | 5/16 x 5/16 x 1-1/4 inch (BS 46) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Slide. 1-1/4 inch - 3/8-16 UNC tap |
| Shaft Style: | Straight |
| Design: | 3 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 6.1 [3.25 x 0.24] - BC dia. 106.4 [4.19] ; Slide. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 300 RPM |
| Rated Speed | 500 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Danfoss hydraulic motor | 151F0545 OMS 160 |
| Model | Danfoss 151F0545 OMS 160 hydraulic motor |
| Search For | Danfoss 151F0545 OMS 160 hydraulic motor |
| Active: | Yes |
|---|---|
| Series: | OMS |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | standard |
| Front Bearing: | Tapered roller bearing |
| Mounting flange: | 4 Bolt - Special |
| Packaging: | Single pack |
| Port dimensions: | G 1/2 , G 1/4 |
| Port Style: | Side ported - offset manifold (2 x M10) |
| Swallowing volume: | 160 cm3/rev |
| Seal Kit: | 151F0111 |
| Series: | O-Series |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1-1/4 inch - M8 tap |
| Shaft Style: | Splined - 14T |
| Design: | 3 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 6.1 [3.25 x 0.24] - BC dia. 106.4 [4.19] ; Slide. 11.6 [0.45] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 300 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Danfoss Hydraulic Motor | 11005427 OMS 250 |
| Model | Danfoss 11005427 OMS 250 Hydraulic Motor |
| Search For | Danfoss 11005427 OMS 250 Hydraulic Motor |
| Series: | OMS |
|---|---|
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | Standard , Standard plus Seal guard |
| Front Bearing: | Tapered roller bearing |
| Mounting flange: | 2 Bolt - A , Special |
| Packaging: | Single pack |
| Port dimensions: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (2 x M10) |
| Swallowing volume: | 250 cm3/rev |
| Seal Kit: | 151F0111 |
| Series: | O-Series |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Slide. 1-1/4 inch - 3/8-16 UNC tap |
| Shaft Style: | Splined - 14T |
| Special Features External 1: | Valve housing - with drain port |
| Design: | 3 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 6.1 [3.25 x 0.24] - BC dia. 106.4 [4.19] ; Slide. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 1200 RPM |
| Rated Speed | 6000 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Danfoss Hydraulic Motor | 151-2003 DH 100 |
| Model | Danfoss 151-2003 DH 100 Hydraulic Motor |
| Search For | Danfoss 151-2003 DH 100 Hydraulic Motor |
| Series: | DH |
|---|---|
| Dust Seal: | Standard |
| Front Bearing: | Journal bearing |
| Mounting Flange: | 2 Bolt - A, Special |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - aligned |
| Replacement: | 151-2003 ??Series 1 |
| Swallowing volume: | 100 cm3/U |
| Seal Kit: | 151-1273 |
| Series: | O-Series |
| Shaft Key: | Woodruff key 1/4 x 1 inch (SAE J502) |
| Shaft Seal: | HNBR - High pressure |
| Shaft Size: | Dia. 1 inch - 1/4-20 UNC tap |
| Shaft Style: | Straight |
| Design: | 0 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 2.6 [3.25 x 0.10] - BC dia. 106.4 [4.19] ; Dia. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 500 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Danfoss White hydraulic motor | Danfoss White 151F2319 OMS 160 hydraulic motor |
| Series: | OMS |
|---|---|
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 2 Bolts - A |
| Packaging: | single pack |
| Port dimensions: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (2 x M10) |
| Swallowing volume: | 160 cm3/rev |
| Seal Kit: | 151F0111 |
| Series: | O-Series |
| Shaft Key: | 5/16 x 5/16 x 1-1/4 inch (BS 46) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Slide. 1-1/4 inch - 3/8-16 UNC tap |
| Shaft Style: | Straight |
| Design: | 3 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 6.1 [3.25 x 0.24] - BC dia. 106.4 [4.19] ; Slide. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 150 RPM |
| Rated Speed | 1000 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Danfoss Hydraulic Motor | 151F2268 OMS 500 |
| Model | Danfoss 151F2268 OMS 500 Hydraulic Motor |
| Search For | Danfoss Hydraulic Motor 151F2268 OMS 500 |
| Series: | OMS |
|---|---|
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - Square |
| Packaging: | Single pack |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (2 x M10) |
| Swallowing volume: | 500 cm3/U |
| Seal Kit: | 151F0111 |
| Series: | O-Series |
| Shaft Key: | 5/16 x 5/16 x 1-1/4 inch (B.S. 46) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1-1/4 inch - 3/8-16 UNC tap |
| Shaft Style: | Straight |
| Design: | 3 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 6.1 [3.25 x 0.24] - BC dia. 106.4 [4.19] ; Dia. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 1000 RPM |
| Material | Cast Iron |
| Phase | Three Phase |
| Country of Origin | Made in India |
| White Danfoss Hydraulic Motor | 151-0727 OMR 315 |
| Type | OMR |
| Baureihe: | OMR |
|---|---|
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Journal bearing |
| Mounting Flange: | 2 Bolt - A |
| Packaging: | Single pack |
| Port Dimension: | G 1/2, G 1/4 |
| Port Style: | Side ported - offset manifold (4 x M8) |
| Replacement: | 11185564 |
| Schluckvolumen: | 315 cm3/U |
| Seal Kit: | 151-1286 |
| Serie: | O-Series |
| Shaft Seal: | HNBR - High pressure |
| Shaft Size: | Dia. 1 inch - M8 tap |
| Shaft Style: | Splined - 6B |
| Design: | 6 |
| Mounting Thread Dimension: | Pilot dia. 82,5 x 8 [3,25 x 0,31] - B.C. dia. 106,4 [4,19] ; Dia. 13,6 [0,53] |
| Typenschlüssel: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 2000 RPM |
| Rated Speed | 1800 RPM |
| Material | Cast Iron |
| Phase | Single Phase |
| Danfoss Hydraulic Motor | 151-6463 OMR F 125 |
| Model | Danfoss 151-6463 OMR F 125 Hydraulic Motor |
| Search For | Danfoss 151-6463 OMR F 125 Hydraulic Motor |
| Type | Hydraulic Motor |
| Series: | OMR F |
|---|---|
| Drain Port Style: | Standard - Piston housing |
| Dust Seal: | Standard |
| Front Bearing: | Journal bearing |
| Mounting Flange: | 2 Shop - A |
| Packaging: | Single pack |
| Port Dimension: | G 1/2 , G 1/4 |
| Port Style: | Side ported - offset manifold (4 x M8) |
| Swallowing volume: | 125 cm3/U |
| Seal Kit: | 151-1287 |
| Series: | O-Series |
| Shaft Key: | A8 x 7 x 32 mm (DIN 6885) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 25 mm - M8 tap |
| Shaft Style: | Straight |
| Design: | 5 |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 8.1 [3.25 x 0.32] - BC dia. 106.4 [4.19] ; Dia. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 20 RPM |
| Rated Speed | 6000 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Danfoss Hydraulic Motor | Danfoss 151-0414 Danfoss OMR 160 , 1510414 |
Danfoss OMR Series Orbital Hydraulic Motor is your key to precision and power in hydraulic systems. Renowned for its efficiency and reliability, this motor is engineered to deliver exceptional performance across various applications.
| Item Id | HZNDANOMR2D8353 |
|---|---|
| Manufacturer | Danfoss |
| Stock Status | In Stock |
| Condition | New |
| Model No | Danfoss OMR 160 , 1510414 Hydraulic Motor |
| Material No | 151-0414 |
| Warranty | 6 Months (T&C Apply) |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 1200 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Danfoss HYDRAULIC MOTOR | White 11104627 OMR 160 N |
| Baureihe: | OMR N |
|---|---|
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 4 Bolt - Square |
| Packaging: | Single pack |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (4 x M8) |
| Schluckvolumen: | 160 cm3/U |
| Seal Kit: | 151-1277 |
| Serie: | O-Series |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1 inch - M8 tap |
| Shaft Style: | Splined - 6B |
| Design: | 5 |
| Mounting Thread Dimension: | Pilot dia. 44,4 x 2,5 [1,75 x 0,10] - B.C. dia. 82,6 [3,25] ; 3/8-16 UNC |
| Typenschlüssel: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 250 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Three Phase |
| Danfoss Hydraulic Motor | 151F0527 OMSW 315 |
| Model | Danfoss 151F0527 OMSW 315 Hydraulic Motor |
| Search For | Danfoss Hydraulic Motor 151F0527 OMSW 315 |
| Series: | WHOSW |
|---|---|
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - Wheel |
| Packaging: | Single pack |
| Port Dimension: | G 1/2 , G 1/4 |
| Port Style: | Side ported - offset manifold (2 x M10) |
| Swallowing volume: | 315 cm3/U |
| Seal Kit: | 151F0111 |
| Series: | O-Series |
| Shaft Key: | A10 x 8 x 45 mm |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 32 mm - M8 tap |
| Shaft Style: | Straight |
| Design: | 3 |
| Mounting Thread Dimension: | Pilot dia. 125 x 8 [4.92 x 0.31] - BC dia. 160 [6.30] ; Dia. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 500 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Size | 315 |
| Mounting Type | WHITE HYRAULIC MOTOR |
| Hydraulic Fluid | DANFOSS HYDRAULIC MOTOR |
| Manufacturer | White |
| Country of production | Denmark |
| Condition | NEW and with original packaging |
| Type code | No |
| Engine series | O-series |
| Base engine | DH |
| Displacement | 315 |
| Design number | 1 |
| Active | Yes |
| Replaced by | No |
| Montageflansch | C |
| Montageflansch Dimension | 3/8 - 16 UNC |
| Shaft type | Spline profile - 6B |
| Shaft size | 1 inch ; 1/4-20 UNC internal thread |
| Key | No |
| Connection type | Side connection - side by side |
| Connection size | 7/8 - 14 UNF |
| Leakage oil connection type | No |
| Leakage oil connection size | No |
| Brake connection | No |
| Brake connection size | No |
| Painting | No |
| Special version 1 | No |
| Special version 2 | No |
| Special version 3 | No |
| Dust seal | Standard - HPS |
| Shaft seal | HNBR - HPS |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 300 RPM |
| Rated Speed | 2000 RPM |
| Material | Cast Iron |
| Phase | Single Phase |
| Sauer Danfoss Hydraulic Motor | 151-0611 Omp 80 |
| Type | Gear motors |
Sauer Danfoss 151-0611 Omp 80 Hydraulic Motor
| Active: | Yes |
|---|---|
| Series: | OMP X |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Integrated in shaft seal, Standard |
| Front Bearing: | Journal bearing |
| Mounting Flange: | 2 Shop - A |
| Packaging: | Single pack |
| Port Dimension: | G 1/2 , G 1/4 |
| Port Style: | Side ported - offset manifold (4 x M8) |
| Swallowing volume: | 80 cm3/U |
| Seal Kit: | 11188319 |
| Series: | O-Series |
| Shaft Key: | A8 x 7 x 32 mm (DIN 6885) |
| Shaft Seal: | HNBR - High pressure |
| Shaft Size: | Dia. 25 mm - M8 tap |
| Shaft Style: | Straight |
| Design: | X |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 8 [3.25 x 0.31] - BC dia. 106.4 [4.19] ; Dia. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 300 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Three Phase |
| Danfoss White HYDRAULIC MOTOR | 11162713 OMR 160 |
| Activ: | Yes |
|---|---|
| Baureihe: | OMR |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Journal bearing |
| Mounting Flange: | 4 Bolt - Square |
| Packaging: | Single pack |
| Painted: | Black - RAL 9005 |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (4 x M8) |
| Schluckvolumen: | 160 cm3/U |
| Seal Kit: | 151-1280 |
| Serie: | O-Series |
| Shaft Key: | 1/4 x 1/4 x 1-1/4 inch |
| Shaft Seal: | HNBR - High pressure |
| Shaft Size: | Dia. 1 inch - 1/4-20 UNC tap |
| Shaft Style: | Straight |
| Design: | 5 |
| Mounting Thread Dimension: | Pilot dia. 44,4 x 2,5 [1,75 x 0,10] - B.C. dia. 82,6 [3,25] ; 3/8-16 UNC |
| Typenschlüssel: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 2000 RPM |
| Rated Speed | 2000 RPM |
| Material | Cast Iron |
| Phase | Three Phase |
| Country of Origin | Made in India |
| Danfoss Hydraulic Motor | OMR X 100 11186164 |
| Model Code | Danfoss Hydraulic Motor OMR X 100 11186164 |
| Search For | Danfoss Dealer For Hydraulic Motor OMR X 100 11186164 |
| Type | OMR |
| Active: | Yes |
|---|---|
| Series: | OMR X |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Integrated in shaft seal , standard |
| Front Bearing: | Journal bearing |
| Mounting flange: | 2 Bolts - A |
| Packaging: | Single pack |
| Port dimensions: | 7/8 - 14 UNF |
| Port Style: | Side ported - aligned |
| Swallowing volume: | 100 cm3/rev |
| Seal Kit: | 11188319 |
| Series: | O-Series |
| Shaft Key: | Woodruff key 1/4 x 1 inch (SAE J502) |
| Shaft Seal: | HNBR - High pressure |
| Shaft Size: | Dia. 1 inch - 1/4-20 UNC tap |
| Shaft Style: | Straight |
| Design: | X |
| Mounting Thread Dimension: | Pilot dia. 82.5 x 2.6 [3.25 x 0.10] - BC dia. 106.4 [4.19] ; Slide. 13.6 [0.53] |
| Type key: | None |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 50 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Single Phase |
| Size | 100 |
| Mounting Type | Mounting |
| Hydraulic Fluid | For WHITE Hydraulic Motor |
| Manufacturer | White |
| Country of production | Denmark |
| Condition | NEW and with original packaging |
| Type code | No |
| Engine series | O-series |
| Base engine | DH |
| Displacement | 100 |
| Design number | 1 |
| Active | Yes |
| Replaced by | No |
| Montageflansch | A2 |
| Mounting flange dimension | No |
| Shaft type | Cylindrical with cross bore 8.0 mm |
| Shaft size | 1 inch internal thread |
| Key | No |
| Connection type | Side connection - side by side |
| Connection size | 7/8 - 14 UNF |
| Leakage oil connection type | No |
| Leakage oil connection size | No |
| Brake connection | No |
| Brake connection size | No |
| Painting | No |
| Special version 1 | No |
| Special version 2 | No |
| Special version 3 | No |
| Dust seal | Standard - HPS |
| Shaft seal | HNBR - HPS |
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 1200 RPM |
| Rated Speed | 800 RPM |
| Material | Cast Iron |
| Phase | Single Phase |
| Danfoss Hydraulic Motor | 151-6132 OMR 100 |
| Model | Danfoss 151-6132 OMR 100 Hydraulic Motor |
| Search For | Danfoss Hydraulic Motor 151-6132 OMR 100 |
| Type | Hydraulic Motor |
Manufacturer: White
Country of production: Denmark
Condition: NEW and with original packaging
Material number: 151-6132
Type code: No
Engine series: O-Series
Base engine: OMR
Swallowing volume: 100
Design number: 5
Active: Yes
Replaced by: No
Mounting flange: A4
Mounting flange dimension: No
Shaft type: Spline - 6B
Shaft size: 1 inch ; 1/4-20 UNC internal thread
Key: No
Connection type: Side connection - offset
Connection size: 7/8 - 14 UNF
Leakage oil connection type: Standard
Leakage oil connection size: 7/16 - 20 UNF
Brake connection: No
Brake connection size: No
Painting: No
Special version 1: No
Special version 2: No
Special version 3: No
Dust seal: Standard
Shaft seal: NBR - standard
Sealing kit: 151-1277
Front bearing: plain bearing
Rear bearing: plain bearing
Orbital set: Standard
Check valve: Yes
Valve function: No
Internal special version 1: No
Internal special version 2: No
Packaging: Individual packaging
Options: Standard
Additional Information:
Minimum Order Quantity: 1 Piece
| Motor Speed | 500 RPM |
| Rated Speed | 800 RPM |
| Type | Hydraulic Motor |
| Material | Cast Iron |
| Phase | Three Phase |
| Shaft type: | Cylindrical |
| Shaft size: | 1 1/4 inch ; 3/8-16 UNC internal thread |
| Passfeder: | 5/16 x 5/16 x 1 1/4 inch (SAE J744) |
| Shaft seal | NBR - standard |
| Baureihe: | OMS |
|---|---|
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - Square |
| Packaging: | Single pack |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (2 x M10) |
| Schluckvolumen: | 500 cm3/U |
| Seal Kit: | 151F0111 |
| Serie: | O-Series |
| Shaft Key: | 5/16 x 5/16 x 1-1/4 inch (B.S. 46) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1-1/4 inch - 3/8-16 UNC tap |
| Shaft Style: | Straight |
| Design: | 3 |
| Mounting Thread Dimension: | Pilot dia. 82,5 x 6,1 [3,25 x 0,24] - B.C. dia. 106,4 [4,19] ; Dia. 13,6 [0,53] |
| Typenschlüssel: | None |
Additional Information: